Geek Bars are disposable vapes designed for simplicity and convenience. Their compact design has made them popular among vapers seeking a hassle-free to-go option. Various flavors and ready-to-use functionality have made them a standout in the vaping community. If you’re searching for how to fix Geek Bar auto firing, this guide will walk you through simple and effective solutions to get your vape functioning properly again.
However, it’s not all sunshine and rainbows as Geek Bars, or any other vapes for that matter may often run into a few issues here and there, one of the most common ones being Auto-Firing. If you have a Geek Bar, you’ve likely faced this issue at least once.
If you’re experiencing this issue and wondering how to fix your Geek Bars auto-firing, follow along as I explain why this is happening, how to stop it, and a few other tips to prevent this from happening.
Table of Contents
What is Auto-Firing in Geek Bars?
So, what is “Auto-Firing” anyways? Geek Bars have a draw-activating system meaning, it heats up when you’re taking a puff to produce vapor. But sometimes for various reasons, your Geek Bar activates and produces vapor even when you’re not drawing.
Is auto-firing something to worry about?
It might not sound like much but it poses some serious risks, such as overheating, battery damage, or even a fire hazard in extreme cases. But if you have advanced Geek Bar devices then most likely it’s nothing to worry too much about as they come with sensors that cut off power if there’s any overheating. Nonetheless, this causes damage to the hardware, wastes e-liquid, and can indicate something more serious.
Common Causes of Geek Bar Auto-Firing
Auto-firing can occur for a number of reasons. Some can be easily dealt with through a little troubleshooting, but some may indicate or cause irreparable damage to the device.
Here are the top reasons why your Geek Bar might be auto-firing:
- Faulty Internal Circuitry
Geek Bars are essentially electrical devices functioning with built-in circuit boards. These circuit boards can wear out over time, causing malfunctions resulting in unintended activations.
- Stuck or Sensitive Fire Button
- Stuck Fire Button
Occurs when the button gets physically jammed or lodged in the “pressed” position. This could be due to dirt, debris, or residue buildup around or underneath the button, preventing it from returning to its original position.
- Overly sensitive Fire Button
This happens when the button activates with minimal or no pressure, behaving as though it has been pressed without any intentional input. Sensitivity issues may result from wear and tear, manufacturing defects, or poor-quality materials.
- Battery Malfunction or Damage
A damaged/improperly connected battery can cause auto-firing. Here are a few ways a faulty battery can cause auto-firing:
- Faulty Connections:
A loose or improperly seated battery may result in inconsistent power delivery, causing the device to activate unexpectedly.
- Damaged Battery Cells:
Over time, a battery may degrade due to repeated charging cycles, exposure to extreme temperatures, or physical impact. Damaged cells may create short circuits that trigger auto-firing.
- Overheating Issues:
If a battery overheats, it can cause internal components to malfunction, leading to unintended activation.
- Defective Battery Management System (BMS):
The BMS regulates power flow in rechargeable devices. A malfunctioning BMS may fail to control power delivery, causing irregular firing patterns.
- Liquid Leakage into the Device
Of all the things that could’ve gone wrong to cause your Geek Bar to auto-fire, this one is the worst. E-liquids leaking into the internal components can short-circuit the device, causing it to autofire. This can cause permanent damage to your Geek Bar.
Overfilling the tank is the main cause of leakage, which could be due to either the manufacturer or the user. Other manufacturing defects can also cause this as well.
- Manufacturing Defects
Sometimes, your Geek Bar can arrive with minor defects that lead to auto-firing from the beginning. This is a very rare case, however.
In such a case, you should immediately call your retailer. Reputable sellers will have some sort of warranty.
Step-by-step Troubleshooting for Geek Bar Auto-Firing
These steps should stop your device from auto-firing. But it is important to remember that your Geek Bar is an electrical device, and practice caution. Some minor issues can be solved with a little wipe-down, but the opposite is also a possibility. Follow the steps below to properly identify the issue and address it accordingly:
- Step 1: Inspect and Clean the Device
Check for dirt, debris, or liquid build-up in the device, especially around the fire button and mouthpiece. Built-up dirt and debris can interfere with its operation. Clean the affected areas with a cotton swab or a dry cloth.
- Step 2: Check the Fire Button
Check the fire button by pressing it repeatedly to see if it feels stuck or jammed. The fire button can get stuck for multiple reasons like dirt/residue, damage, or a hardware issue. An overly sensitive fire button can cause auto-fires. However, if it’s stuck then it’s another issue.
If the fire button gets stuck in the “on position,” it’s very dangerous, and you should stop using that device immediately. Cut off the power to stop the auto-firing and contact your retailer or discard it.
- Step 3: Examine the Battery and Connections
This is really not recommended unless you know what you’re doing as it can be unsafe. Improper circuitry can mess up the power draw, leading to overheating, burnt taste, and auto-firing. If there’s too much wear and tear/ damage then replace it.
- Step 4: Try a little gentle fix
Disposable Geek Bars can act up sometimes. You can try to fix the issue momentarily without opening it up (which is dangerous) by tapping on the vape.
To do this, you have to hold the device upside down and gently but firmly tap on the bottom, on the fire button. This helps if the fire button gets stuck or air holes get clogged. However, if the issue persists then, it’s ideal to recycle the vape.
- Step 5: Reset the Device or Let the battery drain completely
Sometimes resetting the device can help with auto-firing. Turn off the device, and give it a little time to cool off before using it again.
But if your Geek Bar doesn’t have a shut-down button and it’s auto-firing and you’ve already tried all of the steps above, you should move the vape to a safe location (ie. outside) and let the battery completely drain. You can bury it in dirt as a precaution, or put it in a pot with the lid on. This will prevent it from catching on fire. After it’s completely drained, safely discard it.
Preventive Measures for Avoiding Auto-Firing
To avoid such issues, you should always follow proper vaping etiquette:
- Regular Maintenance
Like every device, a little maintenance goes a long way. Clean the device regularly, occasionally check the battery and connections, and inspect the fire button. This helps prevent any future mishaps.
- Safe Usage
Avoid using the device in extreme temperatures, or prolonged single uses. These behaviors can cause the vapes to overheat and a bunch of other issues like auto-firing.
- Proper Storage
Proper storage practice is an essential etiquette that often gets overlooked. You should always store your vapes upright in a cool dry place. This prevents leakage and flooding of the coil.
- Use Compatible Components
Always use compatible products and buy from a trusted retailer. This prevents malfunctions in the future and keeps an open line of communication even if something were to happen.
When to Replace Your Geek Bar
Geek Bars are disposable vapes, so you have to recycle them sooner or later. If your Geek Bar is frequently acting out (overheating, hissing, auto-firing, etc) and nothing helps, this is a sign for you to switch it out. Also, if your device shows signs of physical damage, it’s ideal to discard it even if there’s no issue. If your Geek Bar is non-refillable, you should not attempt to refill it, instead recycle it properly.
Conclusion
Geek Bars have a very compact build so having a few hiccups here and there is common. If your Geek Bar is auto-firing, chances are you can easily address the issue promptly and move on. If you practice safe vaping habits then this shouldn’t be too much of a headache. However, if this is happening too often, then it’s best to contact a professional and let them decide.
Frequently Asked Questions
What is Geek Bar auto-firing, and why is it dangerous?
Auto-firing happens when your Geek Bar activates and produces vapor without pressing the fire button. This can lead to safety risks, such as overheating, battery damage, or even fire hazards if left unresolved.
What are the common causes of auto-firing in Geek Bars?
The most frequent causes include:
1. Faulty internal circuitry.
2. A stuck or sensitive fire button.
3. Battery malfunction or damage.
4. E-liquid leakage into the device.
5. Manufacturing defects.
How can I fix my Geek Bar if it auto-fires?
Follow these steps:
1. Inspect and clean the device to remove dirt, debris, or leaks.
2. Check the fire button to ensure it isn’t stuck or jammed.
3. Examine the battery for secure connections and physical damage.
4. Reset the device or contact a professional technician for help.
Can I prevent Geek Bar auto-firing from happening in the future?
Yes, by taking these precautions:
1. Clean your device regularly to avoid debris buildup.
2. Store the Geek Bar upright and away from extreme temperatures.
3. Use genuine components and replace worn parts promptly.
Should I replace my Geek Bar if it keeps auto-firing?
If the issue persists despite troubleshooting, it’s best to replace the device. Continuing to use a malfunctioning vape could pose serious safety risks.
Is auto-firing covered under Geek Bar’s warranty?
This depends on the manufacturer’s warranty policy. If the device has a manufacturing defect, it might be eligible for a replacement or repair. Contact Geek Bar support for specific guidance.
Can e-liquid leaks cause permanent damage to my Geek Bar?
Yes, e-liquid leaks can damage internal components, potentially leading to short circuits or malfunctioning. Regular maintenance and proper storage can prevent leaks from affecting your device.
